Canon DC210 - Manual (Page 33)

Playback
Basi
c Fu
nct
ion
s
33
(approx. 1 second) at the point where the
playback switches from Layer 1 to Layer 2.
You can display the date and time of the
recording and other camcorder data registered
when the recording was made (
51).
T O ADJUST THE VOLUME
The camcorder plays the sound with the
built-in speaker. The sound will be muted
when you close the LCD panel or connect
the stereo video cable to the AV terminal.
During the playback of a scene:
1 If the joystick guide does not appear
on screen, press (
) to display it.
2 Push the joystick ( ) toward or
to adjust the volume.
• To turn off the volume completely,
keep pressing ( ) until the volume
icon changes to
.
• You can press ( ) again to hide the
joystick guide during playback.
S PECIAL PLAYBACK MODES
Fast Playback
During normal playback, press or
on the camcorder. Repeatedly press
the button to increase the playback
speed.
Fast playback: 5x
→ 15x → 25x
the normal speed.
Slow Playback
During playback pause, press or
on the camcorder. Repeatedly press the
button to increase the playback speed.
Slow playback: 1/16
→ 1/8 → 1/4
the normal speed.
Skipping Scenes
During playback, push the joystick ( ) to
skip to the next scene. Push the joystick
( ) to skip to the beginning of the current
scene. Push the joystick ( ) twice to skip
to the previous scene.
Note that you do not have to display the
joystick guide above to skip the scene.
NOTES
There is no sound during special playback
modes.
During some special playback modes, you
may notice some video problems (blocky video
artifacts, banding, etc.) in the playback picture.
Slow playback is not available with discs
initialized in VIDEO mode.
Depending on the recording, you might
occasionally notice a brief stop of the picture or
sound at the point where the scene changes.
Displaying the Photos
1 Move the power switch to ON, then
slide it down toward MODE and
release it to set the camcorder in
PLAY mode.
The green PLAY indicator will turn on.
2 Move the / switch to the
(Still images) position.
3 Use the joystick ( ) to move
between images.
( 12)
D121C_NTSC-E.book Page 33 Thursday, January 11, 2007 2:46 PM