Amico Freedom Series Recessed - Manual (Page 9)

Installation
REMOVE THE PROTECTIVE FILM PROVIDED ON THE UNITS PRIOR TO THIS STEP OF INSTALLATION.
Install The Panels, Rails and Laminate Strips
1. Remove the inner accessory rail by removing the screws. ONE SIDE ONLY
2. Place all the panels in the frame using the lift and drop method.
3. Reinstall the inner accessory rail.
4. Slide the laminate strip into all rails, with the finished side facing out. (See Figure 6 and Detail F).
5. Install top and bottom end plates.
Detail F – Panel Install
Figure 6 – Middle Panels Set-Up
Inner rail
Inner rail
www.amico.com 9
Top End Plate Bottom End Plate