Amico Majestic Series Double Tier Recessed Headwall - Manual (Page 5)

www.amico.com 5
4. Install the front frame into the console assembly. See Figure 9 for
frame set up.
5. Using hardware provided, secure the frame to the console
assembly using existing holes as shown below (See Figure 9).
6. Replace the fascias into the frames (loosen devices as required).
See Figure 11.
7. Install the cover plates, trims and devices in final locations. See
Figure 12.
8. Remove laminate strips located into the vertical rails (one on each
side of the unit). Using existing holes and the hardware provided,
install the screws through the rails into the wall studs located
behind. See Figure 12 for reference.
9. Replace laminate strips back into the rail, two places typical.
Installation
Figure 9
Figure 10
Figure 11
Figure 12
laminate strip
vertical rail
Install the screws as
shown, using the
existing holes and
provided hardware
as required