Amico Security Recessed Console Box Assembly - Manual (Page 5)

5. Remove any devices that are blocking access to the fl ange
screws. Place everything in a safe and clean location.
6. Loosen the 2 fl ange screws and make necessary adjustments
on both sides.
7. Replace the devices removed in step 5.
8. Replace the aluminum device covers removed in step 4.
9. Mount the console box by using rivets or screws to attach
the fl anges (2 on each side) to the studs (See Fig. 1, NOTE 1).
See architectural drawings for mounting heights. Also
coordinate mounting heights with contractor on site.
www.amico.com 5