Amico Security Recessed Console Box Assembly User Manual
Page 6
Advertising
10.
Make all on-site gas and electrical connections, and perform any wiring required. If it is necessary to
remove an aluminum device plate to wire a device, do so by loosening the screws (typically 2 per cover)
attaching it to the console box.
11.
Amico recommends additional backing strips to ensure security door is anchored securely, Note that the
screws used to mount the security door are approximately 1” above and below the console box. A
backing strip 2’ to 3’ wide will be adequate.
6
Amico Pipeline
Advertising