Amico Hydraulic Patient Transfer Stretcher (S-H-300) - Manual (Page 9)

The sleep surface should be regularly inspected for punctures, rips, tears, or other such damage. Replace the surface as
necessary.
Flammability
!
WARNING:
Patients should not be allowed to smoke in the stretcher. Sheets and pillows generally do not have flame retardant
properties. Personal injury or equipment damage could occur.
Reduce the possibility of fires by observing fire prevention rules and regulations. Make sure facility personnel follow the
safety tips in the FDA Public Health Notification: Safety Tips for Preventing Hospital Bed Fires.
Spray Washing
!
CAUTION:
Do not directly spray the hydraulic cylinders. Equipment damage could occur.
!
CAUTION:
Do not exceed 25 psi (172 kPa) when spray washing. Equipment damage could occur.
The stretcher can be spray washed as necessary. Use a maximum nozzle pressure of 25 psi (172 kPa) at a distance of 6”
(152 mm). Spray wash comprised of water only should not exceed a temperature of 180°F (82°C). Spray wash comprised
of detergent or solvents (no bleach) should not exceed a temperature of 120°F (50°C). After washing, seal any exposed
chipped steel parts, or oxidized areas with a coat of touch-up paint.
Safety Tips
Description Part Number
Hydraulic Actuator B-ST-ACT-01
Siderail Assembly S-SIDERAIL-001
Base Cover S-X-COVER-BASE-01
Roller Bumper S-X-ROLLER-BUMPER
Oil Pan S-X-OILPAN
Tente® Wheel Caster S-CAS-ST-08B1
IV Hook S-X-IVHOOK
Replacements Parts
16 Amico Beds www.amico.com 17