Chicago Electric HARBOR FREIGHT TOOLS 98753 - Manual (Page 2)

SKU 98753 For technical questions, please call 1-800-444-3353. Page 2
SaVe thiS manual
Keep this manual for the safety warn­
ings and precautions, assembly, operat­
ing, inspection, maintenance and cleaning
procedures. Write the product’s serial
number in the back of the manual near the
assembly diagram (or month and year of
purchase if product has no number). Keep
this manual and the receipt in a safe and
dry place for future reference.
impOrtant SaFetY
inFOrmatiOn
in this manual, on the labeling,
and all other information provid-
ed with this product:
this is the safety alert
symbol. it is used to alert
you to potential personal
injury hazards. Obey all
safety messages that
follow this symbol to avoid
possible injury or death.
danger indicates
a hazardous
situation which, if not
avoided, will result in death or
serious injury.
warning
indicates a
hazardous situation which, if
not avoided, could result in
death or serious injury.
cautiOn, used
with the safety
alert symbol, indicates a
hazardous situation which, if
not avoided, could result in
minor or moderate injury.
nOtice is used to
address practices
not related to personal injury.
cautiOn, without
the safety alert
symbol, is used to address
practices not related to
personal injury.
general welder Safety warnings
warning read all safety
warnings and instructions.
Failure to follow the warnings and
instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and
instructions for future reference.
work area safety 1.
Keep work area clean and well lit. a.
Cluttered or dark areas invite acci-
dents.
do not operate welders in explo-
b.
sive atmospheres, such as in the
presence of flammable liquids,
gases or dust. Welders create
sparks which may ignite the dust or
fumes.
Keep children and bystanders
c.
away while operating a welder.
Distractions can cause you to lose
control.
electrical safety
2.
avoid body contact with grounded a.
surfaces such as pipes, radiators,
ranges and refrigerators. There is
an increased risk of electric shock if
your body is grounded.
do not expose welders to rain or
b.
wet conditions. Water entering a
welder will increase the risk of electric
shock.