Appendix e, Liquid setup with header bars – Amico Automatic Cryogenic Liquid Solenoid Manifold User Manual
Page 30
Advertising
30
Amico Pipeline
Appendix E
Liquid Setup with Header Bars
Inch
[mm]
NOTE: A standard 450psi relief valve is
provided on the header.
40 [1016]
Dependent upon type
of Liquid cylinder used.
60
[1524]
40 [1016]
60
[1524]
9
[229]
Dependent upon type
of Liquid cylinder used.
Minimum tank pressure
must be at least 300 psi
for Liquid Nitrogen and
200 psi for all other gases.
19
[432]
Minimum tank pressure
must be at least 300 psi
for Liquid Nitrogen and
200 psi for all other gases.
Minimum tank pressure
must be at least 300 psi
for Liquid Nitrogen and
200 psi for all other gases.
H.P. Vent (1/2" NPT)
Approx.
Approx.
Push
To
Start
OXYGEN
Front View
Side View
17
[432]
Supply Line
Provision for Reserve Manifold
Relief Valve Vent
3/4” Isolation Valve
Advertising