Amico Extended Latch-Valve Kit - Manual (Page 2)

The Latch Valve Extension Kit allows you to alter a Latch Valve Assembly to accommodate a 1-1/4” to 2” wall thickness.
Latch Valve Extension Kits shall be cleaned and degreased for medical gas services, factory assembled and tested.
Required Tools:
Tape Measure
Philips Type Screw Driver
Kit Contents
Model Number: O-FASC-EXT-KIT
Item Quantity Description
1 1 Extended Adaptor with Seal
2 1 3/8" [9.525 mm] Stand-Off Filler Frame
3 2 Indexing Pin Extensions
4 3 #6-32 x 3", Phillips Flat Head Screw
5 2 #6-32 x 7/16", Phillips Flat Head Screw
6 2 #6-32 Keps Nut
7 1 1/16" Hex Allen Key Wrenc
8 2 #6-32 x 3/8" Set Screw (already install in, extension assembly
9 2 #6-32" x 1/8" Set Screw (already install in, indexing pin assembly)
2 Amico Pipeline