Amico Extended Latch-Valve Kit - Manual (Page 4)

Step 2: Assemble Extension Adapter to Latch Valve
*Install and push the Extension Adapter fully, onto the
barrel of the Front Latch Assembly (Figure 5).
*Tighten the two set screws with the provided 1/16” Hex
Allen Key (Figure 6).
Step 3: Assemble Indexing Pin Extension to Latch Valve
*Slide indexing pin extensions fully onto latch valve
indexing pins (Figure 7)
*Tighten set screws with provided 1/16” Hex Allen Key
*(Figure 8)
Note: Indexing pin extensions must not protrude more
than ¼” beyond the end of the Extension Adapter.
Figure 5
Figure 6
Figure 7
Figure 8
4 Amico Pipeline