Amico Medical Gas Check Valve with Extensions - Manual (Page 4)

12. Test the system (per appropriate standards) to ensure that the intended gas service is
connected to the appropriate line.
13. Test the system for leaks (per appropriate standards).
14. If no leaks are found, gauges (purchased separately) can be installed, if required. Pipe
sealants should comply with requirements of NFPA 99 or CSA Z7396.1. Use care to exclude
pipe sealants from the check valve cavity and from interior tube surfaces exposed to medical
gas flow service. Properly applied Teflon tape is an alternative to pipe sealants.
4 Amico Pipeline