Crown Audio CTs 600 - Manual (Page 5)

page 5
CTs 2-Channel Power Amplifiers
Operation Manual
1 Welcome
Building on the foundation of the Com-Tech ®
Series, the Crown ® CTs Series offers new flexi-
bility and value for installed sound. The Com-
Tech Series was the first to offer independent
selection of high- and low-impedance opera-
tion for a specific channel, and CTs Series
amplifiers continue that tradition, with power
levels and features carefully chosen to perfectly
integrate into fixed install design requirements.
Modern power amplifiers are sophisticated
pieces of engineering capable of producing
extremely high power levels. They must be
treated with respect and correctly installed if
they are to provide the many years of reliable
service for which they were designed.
In addition, CTs Series amplifiers include a
number of features which require some expla-
nation before they can be used to their maxi-
mum advantage.
Please take the time to study this manual so
that you can obtain the best possible service
from your amplifier.
1.1 Features
• Switching Power Supply for reduced
weight.
• High power-density, with all two-channel
models in a 2U chassis.
• Direct constant-voltage
(70V/140V) or low-impedance (2/4/8
ohm) operation. No switch required.
• Input sensitivity is independently select-
able for each channel. Choose low-imped-
ance (4/8 ohm), constant-voltage (70V/
100V/140V/200V), or 26 dB.
• TLC protection circuitry protects the
amplifier from long-term excessive heat by
subtly and dynamically reducing the gain
only when necessary.
• JTS circuitry (CTs 600/1200 only) quickly
protects BJT output transistors from
unsafe operating conditions without shut-
ting the channel down. (Not applicable to
BCA amplifiers as they are inherently pro-
tected.)
• P I P 2 ™ (Programmable Input Processor)
connector accepts accessory modules that
tailor the amplifier to suit specific applica-
tions.
• Removable terminal block input connec-
tors, with “Y” Input Switch in the standard
PIP2-BBY module.
(Continued on next page)
*20 Hz–20 kHz Power: refers to maximum
average power in watts from 20 Hz
to 20 kHz with 0.35% THD.
CTs 3000
2-ohm Dual (per ch.)
4-ohm Dual (per ch.)
8-ohm Dual (per ch.)
16-ohm Dual (per ch.)
70V Dual (per ch.)
100V Dual (per ch.)
4-ohm Bridge
8-ohm Bridge
16-ohm Bridge
100V Bridge
200V Bridge
1500W
1500W
1250W
625W
1500W
1500W
3000W
3000W
2500W
3000W
3000W
20 Hz–20 kHz
Power
*
*20 Hz–20 kHz Power: refers to maximum
average power in watts from 20 Hz
to 20 kHz with 0.35% THD.
CTs 2000
2-ohm Dual (per ch.)
4-ohm Dual (per ch.)
8-ohm Dual (per ch.)
16-ohm Dual (per ch.)
70V Dual (per ch.)
100V Dual (per ch.)
4-ohm Bridge
8-ohm Bridge
16-ohm Bridge
140V Bridge
200V Bridge
1000W
1000W
1000W
625W
1000W
1000W
2000W
2000W
2000W
2000W
2000W
20 Hz–20 kHz
Power
*
*20 Hz–20 kHz Power: refers to maximum
average power in watts from 20 Hz
to 20 kHz with 0.1% THD.
CTs 600
2-ohm Dual (per ch.)
4-ohm Dual (per ch.)
8-ohm Dual (per ch.)
16-ohm Dual (per ch.)
70V Dual (per ch.)
4-ohm Bridge
8-ohm Bridge
16-ohm Bridge
140V Bridge
150W
300W
300W
300W
300W
300W
600W
600W
600W
20 Hz–20 kHz
Power
*
*20 Hz–20 kHz Power: refers to maximum
average power in watts from 20 Hz to 20 kHz
with 0.1% THD.
CTs 1200
2-ohm Dual (per ch.)
4-ohm Dual (per ch.)
8-ohm Dual (per ch.)
16-ohm Dual (per ch.)
70V Dual (per ch.)
4-ohm Bridge
8-ohm Bridge
16-ohm Bridge
140V Bridge
250W
600W
600W
300W
600W
500W
1200W
1200W
1200W
20 Hz–20 kHz
Power
*