Amico TTS Vertical Flat Wall - Manual (Page 3)

Intended Use
Introduction
The Amico Teaching Solution has a simple design and incorporates distinctive features, which simulates a real
world medical environment for students.
The Teaching Solution comes in either a Horizontal Sapphire or a Vertical Flat wall. The floor stand which is the base
of the Teaching Solution shall allow for mobility with relative ease. The Teaching Solution includes fully functional
Secondary Products in order to provide students with a more realistic experience.
Amico Secondary Products such as an oxygen flowmeter, medical air flowmeter, vacuum regulator, vacuum canister
and humidifier bottle also helps to assist in creating a simulated medical environment for students to train and sharpen
their skills.
www.amico.com 3
The following is an assembly reference guide for the Amico Teaching Solution. This guide shows the step by step process
to assemble and operate the Amico Teaching Solution. It shall guide users in assembling Amico Secondary Products
onto the Teaching solution, and shall show how to correctly connect the air compressor to the Teaching Solution.
All parts needed in the assembly are shown under the components section of this guide, and all steps required
for correct assembly can be found under the installation section. If users shall experience any difficulties with this assembly,
please contact Amico Beds for assistance.
This manual provides instructions required for normal operation of the Teaching Solution from Amico Beds
Corporation. Prior to operation of this Teaching Solution, it is important that this manual is read and that all safety
aspects contained in this manual are strictly adhered to.