0 specifications – Aphex A PRE 500 User Manual

Page 6

Advertising
background image

Page 10

Page 11

4.2 SERVICE INFORMATION

If it becomes necessary to return this unit for repair, you must first contact

Aphex for a Return Authorization (RMA number), which will need to be

included with your shipment for proper identification. If available, repack

this unit in its original carton and packing material. Otherwise, pack the

equipment in a strong carton containing at least 2 inches of padding on

all sides. Be sure the unit cannot shift around inside the carton. Include a

letter explaining the symptoms and/or defect(s). Be sure to reference the

RMA number in your letter and mark the RMA number on the outside of

the carton. If you believe the problem should be covered under the terms of

the warranty, you must also include proof of purchase. Insure your shipment

and send it to:

APHEX

3500 N. San Fernando Blvd. Burbank, CA. 91505 USA

PH: 818.767.2929 FAX: 818.767.2641

INPUT

Type:

Impedance:

Instrument Imdedance:

CMRR:

Gain Range:

Pad:

Max Input Level Limiter off:

Low Cut:

OUTPUT

Type:

Nominal Level:

Maximum Level (Meter 0dB):

Impedance:

AUDIO

Frequency Response:

Dynamic Range:

THD:

EIN:

POWER

Current draw:

Aphex Custom Transformer
1300 ohm nominal
10M ohm nominal
>90dB @ 60Hz
+30dB to 70dB (no pad, +24 level)
26dB
-3dBu (no pad), +23dBu (pad)
2nd order, -3dB @ 75Hz

Transformer balanced, Jensen JT-11-DL
+4dBu
+24/+20/+16 dBu switchable
100 ohm nominal

+/-1 dB <10Hz to 100kHz
120dB
<0.003% @ +4dBu out10Hz - 22kHz 0
-125dBu @ max gain

75mA

6.0 SPECIFICATIONS

CONNECTOR PINOUT

1 CHASSIS GROUND

2 OUTPUT + (+4 LEVEL)

3 (unused)

4 OUTPUT - (+4 LEVEL)

5 COMMON

6 (unused)

7 (unused)

8 INPUT- (+4 LEVEL)

9 (unused)

10 INPUT+ (+4 LEVEL)

11 (unused)

12 +16VDC

13 POWER SUPPLY COMMON

14 -16VDC

15 (unused)

3500 N San Fernando Blvd. Burbank, CA 91505 USA

PH: 818.767.2929 FAX: 818.767.2641

www.APHEX.com

Advertising