Aphex Project 500 - Manual (Page 6)

Page 10 Page 11
PERIOD
Two years from date of purchase.
SCOPE
All defects in workmanship and materials. The following are not covered:
a. Voltage conversions.
b. Units on which the serial number has been defaced, modified, or removed
c. Damage or deterioration:
1. Resulting from installation and/or removal of the unit.
2. Resulting from accident, misuse, abuse, neglect, unauthorized
product modification or failure to follow instructions contained
in the User’s Manual.
3. Resulting from repair or attempted repair by anyone not
authorized by Aphex.
4. Occurring from shipping (claims must be presented to shipper).
WHO IS PROTECTED
This warranty will be enforceable by the original purchaser and by any subsequent
owner(s) during the warranty period, so long as a copy of the original Bill of
Sale is submitted whenever warranty service is required.
WHAT WE WILL PAY FOR
We will pay for all labor and material expenses for covered items. We will pay
return shipping charges if the repairs are covered by the warranty.
LIMITATION OF WARRANTY
No warranty is made, either expressed or implied, as to the merchantability
and fitness for any particular purpose. Any and all warranties are limited to
the duration of the warranty stated above.
EXCLUSION OF CERTAIN DAMAGES
Aphex’s liability for any defective unit is limited to the repair or replacement
of said unit, at our option, and shall not include damages of any other kind,
whether incidental, consequential, or otherwise.
Some States do not allow limitations on how long an implied warranty lasts
and/or do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitations and exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other
rights which vary from State to State.
6.0 SERVICE & WARRANTY
6.1 LIMITED WARRANTY
6.2 SERVICE INFORMATION
If it becomes necessary to return this unit for repair, you must first contact
Aphex for a Return Authorization (RMA number), which will need to be
included with your shipment for proper identification. If available, repack
this unit in its original carton and packing material. Otherwise, pack the
equipment in a strong carton containing at least 2 inches of padding on
all sides. Be sure the unit cannot shift around inside the carton. Include a
letter explaining the symptoms and/or defect(s). Be sure to reference the
RMA number in your letter and mark the RMA number on the outside of the
carton. If you believe the problem should be covered under the terms of the
warranty, you must also include proof of purchase. Insure your shipment and
send it to APHEX at the address provided with the RMA.
INPUT
Type:
Impedance:
Unbalanced:
Nominal Level: Maximum
Level:
CMRR:
OUTPUT
Impedance:
Nominal Level:
Maximum Level:
AUDIO
Frequency Response:
Dynamic Range:
THD:
IMD:
OPERATING LEVEL
Switch Setting: +4dBu
Transformerless, active balanced
40KΩ
20KΩ
+4dBu
+24dBu
>40dB
110Ω
+4dBu
+24dBu Unloaded
+0.5dB 10Hz-38KHz
120dB
10Hz - 22kHz @ max output
.0003%
10Hz - 22kHz 0 max output,
.0007%
7.0 SPECIFICATIONS
CONNECTOR PINOUT
1 CHASSIS GROUND
2 OUTPUT + (+4 LEVEL)
3 (unused)
4 OUTPUT - (+4 LEVEL)
5 COMMON
6 LINK
7 (unused)
8 INPUT- (+4 LEVEL)
9 (unused)
10 INPUT+ (+4 LEVEL)
11 (unused)
12 +16VDC
13 POWER SUPPLY COMMON
14 -16VDC
15 (unused)