Apricorn Aegis Padlock SSD - USB 3.0 Solid State Drive - Manual (Page 17)

17
Diagnostic Mode
The keypad has a manual diagnostic mode built in to verify proper keypad
function. This mode will not allow access to any data or admin function. It
can only be used to identify the firmware level and to test button recognition.
The diagnostic mode is also useful for troubleshooting key issues.
To enter the diagnostic function:
1. During Power up hold 0 key until the Power-On-Self-Test (POST)
completes.
2. The LED will flash BLUE for the major and minor revisions and RED LED
to indicate (.) When complete, the LED will return to a solid BLUE LED
(Example: Four BLUE flashes followed by one RED flash followed
by one BLUE flash followed by one RED flash would indicate
version 4.1.)
3. Key presses after the revision will coincide with the number pressed
using the BLUE LED.
4. Example 1 = 1 flash, 2 = 2 flashes, 3 = 3 flashes,…. 0 = 10 flashes
5. Unlock = 11 flashes, Lock = 12 flashes.
6. To Exit the Diagnostic Mode, a power re-set is required. Unplug and
re-plug the USB cable to return to normal operation.