Connecting with the usb y-cable – Apricorn Aegis Padlock SSD - USB 3.0 Solid State Drive User Manual
Page 6
Advertising
6
Connecting with the USB Y-Cable
If none of the Aegis Padlock LEDs power on a single USB connection, use
the included USB Y-cable.
1.
Attach the Aegis Padlock’s integrated USB cable to the female connector
of the USB Y-cable.
2.
Connect the two male USB connectors to two available USB ports on
your computer.
3.
At least one of the Aegis Padlock LEDs should turn on, indicating that the
Aegis Padlock is powered.
Advertising