Apricorn Aegis Padlock USB 2.0 - Solid State Drive - Manual (Page 6)

www.apricorn.com 6
Aegis Padlock - Getting Started
Before you begin
Be sure to review the following information before you begin to use the Aegis
Padlock.
Attention: Use only the included cables with your Aegis Padlock. You might
damage the drive if you use a cable not included with the Aegis Padlock.
The Aegis Padlock is designed for portable use without an AC power adapter and
in most cases will be able to power on a single USB port. In the event that the
Aegis Padlock is unable to power on a single USB connection, use the included
USB Y-cable.
Connecting the Aegis Padlock
1. Attach the integrated USB cable of the Aegis Padlock drive to an available USB
port on your computer, as shown below.
2. The Aegis Padlock indicator light should glow red.
If the Indicator light
does not power, use the
included USB Y-cable.
Refer to directions on the
following page