Connecting the aegis padlock with usb y-cable – Apricorn Aegis Padlock USB 2.0 - Solid State Drive User Manual
Page 7
www.apricorn.com
7
Connecting the Aegis Padlock with USB Y-Cable
If the indicator light does not power on a single USB connection, use the included
USB Y-cable.
1.
Attach the Aegis Padlock’s integrated USB cable to the female connector of the
USB Y-cable.
2.
Connect the two male USB connectors to two available
USB ports on your computer.
3.
The Aegis Padlock indicator light should glow red.
You can use it in one of the following ways:
•
Enter the Admin Mode with 123456 (default administrator password), and
then you are able to change the Admin Password or create a User Password.
•
Directly enter the Secure User Mode with 123456 (default Admin
Password) to use the Aegis Padlock.
How do I use the Aegis Padlock the first time?
What if I forget the User Password?
Use your Admin Password to enter Admin Mode, and then create another User
Password in Admin Mode.