Verification errors, Contacting technical support, Rma policy – Apricorn EZ Upgrade - Universal Hard Drive Upgrade Kit User Manual

Page 18

Advertising
background image

34

35

www.apricorn.com

www.apricorn.com

SafeRescue) with the help of special data recovery strategies within a

proper troubleshooting run. During the troubleshooting run, the number of

the indicated write errors can decrease according to the areas on the target

medium, which could be recovered.

Verification errors

When the option Verifying is activated, EZ Gig III executes a verification

run after the copying process. A verification error is counted if the data of

two sectors on source and target do not correspond. Furthermore, read

errors, which occur during the verification run in one or both of the areas

to be compared, are also counted as verification errors. Therefore, the

number of verification errors gives you absolute information on how exactly

source and target correspond to each other after the copying process. In

case of an error-free copying process, EZ Gig III should not report any

verification errors and signalize a 100% conformity of source and target.

Contacting Technical Support

Apricorn provides the following helpful resources for you:

1. EZ Upgrade User’s Guide and Quick Start Guide

2. Apricorn’s Website (http://www.apricorn.com)

This gives you the ability to check for up-to-date information.

3. E-mail us at [email protected].

4. Or call the Technical Support Department at 1-800-458-5448.

Apricorn’s Technical Support Specialists are available from 8:00 a.m.
to 5:00 p.m., Pacific Standard Time from Monday through Friday.

RMA Policy

An RMA (Return Merchandise Authorization) tracking number must be issued

by Apricorn. If you need to return or replace your upgrade kit, Apricorn

requires that you perform the following steps:

1. Find your original receipt.

2. Simply call Apricorn’s technical support department with your upgrade kit

part number and a description of the problem(s) you are experiencing.

3. If the Apricorn representative finds cause for a return, they will issue an

RMA number. Please write this number down.

4. Fill out an RMA authorization form with your package. The RMA form is

available on-line at http://www.apricorn.com/support/rma.php.

5. Please send the prepaid package including RMA form and receipt to the

following address, make sure the RMA# is written on the exterior of the

package:

Apricorn

RMA#: __________

12191 Kirkham Road

Poway, CA 92064

The purchaser shall be responsible for any loss or damage to the returned

product until it is received by Apricorn. Purchaser should consider obtaining

insurance with respect to shipping the product.

Advertising