Cloning your hard drive with ez gig iii, Selecting the source drive – Apricorn EZ Upgrade - Universal Hard Drive Upgrade Kit User Manual
Page 7
Advertising
12
13
www.apricorn.com
www.apricorn.com
Cloning your hard drive with EZ Gig III
1. Click the “Let’s Get Started” button to proceed.
2. EZ Gig will then scan for connected drives. This may take a few
moments.
Selecting the Source Drive
Once EZ Gig III has scanned for connected drives, you will be asked to
select your Source Drive. This is the drive you would like to copy from and
in most cases is the internal drive in your notebook.
NOTE: Your computer’s internal drive will usually be denoted by the
prefix IDE
Select the appropriate drive from the menu and click “Next” to continue.
Advertising