Apricorn Velocity Solo - SSD Upgrade Kit for Desktop PCs - Manual (Page 7)

12 13 www.apricorn.com www.apricorn.com
Cloning your hard drive with EZ Gig
1. Click the “Let’s Get Started” button to proceed.
2. EZ Gig will then scan for connected drives. This may take a few
moments.
Selecting the Source Drive
Once EZ Gig has scanned for connected drives, you will be asked to select
your Source Drive. This is the drive you would like to copy from and in this
case is the internal drive in your computer.
NOTE: Both your computer’s internal drive and the drive on the
Velocity Solo will be denoted by the prefix AHCI or IDE, so take note
of your new drive’s part number before starting the clone.
Select your computer’s internal drive from the menu and click “Next” to
continue.