Apricorn Velocity Solo - SSD Upgrade Kit for Desktop PCs - Manual (Page 8)

14 15 www.apricorn.com www.apricorn.com
Selecting the Destination Drive
Once you have selected your Source Drive, EZ Gig will ask you to select
your Destination Drive. This is the drive you would like to copy to. Select
the drive that is connected to your Velocity Solo card.
NOTE: Before installing your new drive on your Velocity Solo card,
take note of the drive part number. This will be the Destination drive.
Select the drive on your Velocity Solo card from the menu and click “Next”
to continue.
Click the Speed Test icon
on either the Source or
Destination drive for an
estimate of the drive’s read
speed.
From this estimate, a rough
estimate of the clone time
may be gauged
Speed Test
Drive Verification
You are almost ready to start your clone, but before you do, EZ Gig asks
that you verify that the choosen drives are correct.
If they are you have one of two options. Either click “Next” to
continue (go to page 26) or to deselect files from the cloning process,
press the “Data Select” button (go to page 17).
If you need to change your drive selection, click the “Back” button
At this point you can also modify the default options for your clone using
the “Advanced Options” button. Only select this option if you would like
to change your options from the default (go to page 21 for more info on
Advanced Options).