B&G Triton Display - Manual (Page 14)

12 |
Wiring | IS40/Triton System Installation Manual
Typical network example
120
LTW
LTW
LTW
LTW
T
T
12V DC
¼ Notes:
• The backbone must be terminated at both ends. The wind sensor
has a built-in terminator and can be used as one of the terminators
• Daisy-chaining, as shown in this illustration, is recommended for
ease of installation. It will still be compatible with most NMEA 2000
devices but not fully comply with NMEA 2000 standard.