B&G Triton Display - Manual (Page 7)

| 5
Overview | IS40/Triton System Installation Manual
Overview
The Display and Autopilot controller
5 4
6
7
3
2
1 AUTO
10 10
1 1
MODE STBY
1. Menu / Enter key
Used to enter the main menu, select sub menus and confirm
selection.
¼ Note: Press and holding the Enter key for 3 seconds takes you
directly to the display setup lighting level screen. If the lighting level
is set below 5 it will automatically increase to 5. Use the up and
down keys to set the desired level and press Enter to confirm.
2. Page key
Scrolls through the eight default display pages and navigates back a
step in menus.
¼ Note: the eight default display pages including Autopilot page can
be customized to display the required data.
3. Directional keys
Scrolls up and down through selected menus / set values.
4. Mode key
Changes the Autopilot mode.
5. STBY key
¼ Note: the key is labeled OFF on some models.
Changes the autopilot to Standby mode.
6. Course control keys
Changes target course / Activates Non Follow Up (NFU) mode when
in Standby mode.
7. Auto key
Changes the autopilot to AUTO mode.