B&G Network Speed - Manual (Page 7)

CALIBRATION AND OPERATING PARAMETERS
When current boat speed is displayed, press the SETUP key
to cycle through the following options:
• DAMPING The response time of the display to
changes in boat speed.
• SPEED KT The boat speed can be displayed in Knots
KT or MPH MH. This setting also changes
the log units to Nautical Miles or Statute
Miles.
• SPD CAL Manual boat speed and log calibration
• LOG CAL Manual boat speed and log calibration
• AUTO CAL Automatic boat speed and log calibration
The procedures for using the SETUP options are on the
following pages.
When in SETUP mode:
• The SPEED key becomes the UP key ¿
• The LOG key becomes the DOWN key À
• The LIGHTS key becomes the ENTER key.
7