Baseline Systems BaseStation 3200 in Pedestal - Manual (Page 3)

BL-3200WF-P Wi-Fi Module for Pedestal
Installation Guide
1-866-294-5847
Rev 10.9.2014
www.baselinesystems.com
Attach the Antenna Riser to the Pedestal
1. Feed the free end of the antenna cable through
the small X that you made in the gasket and into
the inside of the pedestal.
2. Align the holes at the bottom of the antenna
riser with the holes in the gasket at the mounting
location on the outside left wall of the pedestal.
3. Working from the outside of the pedestal, insert
the bolts that you removed earlier into the four
holes.
4. Working from the inside of the pedestal, thread
the nuts that you removed earlier onto the four
bolts. Tighten the nuts snugly.
Attach the Antenna Cable Adapter
1. Working from the inside of the pedestal, thread
the brass end of the antenna cable adapter into
the end of the long antenna cable. Tighten the
connection securely.
2. Connect the other end of the antenna cable
adapter onto the stem of the Wi-Fi module and
hand-tighten it.
3. You can gently push the excess length of
antenna cable back through the pedestal wall
so it is held within the antenna riser.
Continued 
Page 3
IMPORTANT! Do not bend or kink the antenna
cable.