Baseline Systems X-Series Pedestal - Manual

Materials and Tools
 Tools as needed for constructing the concrete form (drill, screwdriver, marker, tape measure, level,
etc.)
 2” x 6” lumber for constructing the concrete form
 Concrete
 Tools as needed for finishing the concrete
 Tools as needed for working with conduit (cutter, etc.)
 Hardware for the electrical power and irrigation wiring (½” conduit, wire, wire nuts, etc.) and tools as
needed
 4 stainless steel anchor bolts with washers and nuts
 Wrench for attaching the nuts to the anchor bolts
Baseline X-Series Pedestal
Installation Guide
1-866-294-5847
Rev 3.8.2013
www.baselinesystems.com
X-Series Pedestal
The X-series pedestal units are designed to be mounted on a concrete pad and hold a Baseline
controller in an X cabinet.
Remove all packaging materials from the pieces.
Remove the door from the pedestal.
Identify all parts.
X Cabinet
Pedestal
Pedestal Base
Controller Mounting Bracket