Baseline Systems BaseManager 2.0 - Manual (Page 6)

BaseManager 2.0 Server Configuration Guide
BaseManager 2.0 Server Configuration
After the BaseManager server hardware has been powered up, the following message displays on
the monitor:
** Welcome to BaseManager 2.0 Central Control Server Setup **
Step 1 – Set Up the Password for the Root (Admin) User
1. At the Login prompt, type config, and then press ENTER.
2. At the Password prompt, type B@s3l1n3, and then press ENTER.
3. Press any key until the Root Password Setup screen displays.
4. In the Password field, type a secure password.
5. Press the TAB key to move to the Password (confirm) field. Retype the password exactly as
you typed it before.
6. Press the TAB key to move to the OK button, and then press ENTER. The server displays the
following message:
Congratulations. Your password has been set.
Note: Use this password for the following logins:
linux root user (uid=0)
linux config user (this login)
mysql database root user (mysql --user=root ... )
system setup root user ( https://hostname.domainname:10001 ) – replace
“hostname.domainname” with the domain name that you set up in Step 2 of this
Configuration Guide.
8. Write down your password and keep it in a secure place.
2