Baseline Systems BaseManager 2.0 - Manual (Page 8)

BaseManager 2.0 Server Configuration Guide
Step 4 – Set Up the IP Information
1. In the Select Action screen for Network Configuration, press TAB to select Device
configuration. The Select a Device screen displays with the ethØ (ethØ) – Ethernet line
highlighted.
2. Press ENTER. The Network Configuration screen displays with the cursor in the Name field.
3. Leave the default entries in the Name and Device fields.
4. Perform one of the following in the Use DHCP field:
 If your network has a DHCP server that assigns IP addresses to connected devices, leave
the default entry [*] in the field. Press TAB to select the Ok button, and then press
ENTER. Continue to step 6.
 If you want to assign a static IP address, press TAB to move to the Use DHCP field, and
then press SPACEBAR to remove the * from the field. Press TAB to move to the
additional fields, and complete those fields as you go. Press TAB to select the Ok button,
and then press ENTER. Continue to step 6.
4