Contents
INTRODUCTION ....................................................................................................................................... 1
FLOWSTATION FRONT PANEL LAYOUT ............................................................................................ 1
On-Screen Help ................................................................................................................... 2
CONTROLLER STATUS REPORT ........................................................................................................... 3
Understanding Controller Statuses ...................................................................................... 3
OVERVIEW OF FLOWSTATION AND SHARED FLOW SETUP ........................................................ 4
QUICK START FOR THE FLOWSTATION AND SHARED FLOW GROUP ....................................... 4
STEP 1 – Install the FlowStation .......................................................................................... 4
STEP 2 – Power Up the Communication Module in the FlowStation ..................................... 4
STEP 3 – Configure the Network Settings on the FlowStation ............................................... 4
STEP 4 – Install the BaseStation 3200 Controllers ................................................................ 6
STEP 5 – Install and Connect All Devices .............................................................................. 6
STEP 6 – Complete the BaseStation 3200 Configuration ....................................................... 6
STEP 7 – Power Up the Communication Modules in the BaseStation 3200s .......................... 6
STEP 8 – Configure the Network Settings on the BaseStation 3200s ..................................... 6
STEP 9 – Connect the BaseStation 3200s to the FlowStation ................................................ 7
STEP 10 – Check the BaseStation-FlowStation Connection Status ........................................ 8
STEP 11 – Turn Over Control of the POCs to the FlowStation ............................................... 8
STEP 12 – Assign the Programs to the FlowStation .............................................................. 9
STEP 13 – Configure the FlowStation Settings ...................................................................... 9
Page i
