Baseline Systems FlowStation - Manual (Page 7)

FlowStation Quick Start Guide
Controller Status Report
When the FlowStation is in the RUN menu, the Controller Status report typically displays on the
screen.
If you do not see “CONTROLLER STATUS” and the
list of controllers, press the RUN button to make
sure that the controller is in the RUN menu, and
then press the BACK button to display the Status
Report menu. Select the Controller Status option
from the menu.
Understanding Controller Statuses
The following icons identify the status of the controllers in the Shared Flow Group:
Icon Status Description
Unassigned No controller is assigned
Done The complete cycle has finished for this controller – including
watering and soaking
Waiting The controller is scheduled to run, but currently it is not
watering or soaking
Watering Watering is in progress
Soaking The controller finished watering a zone and it is now soaking
Paused A pause condition is in effect
Disabled or
Disconnected
The controller is marked as being disabled or disconnected from
the FlowStation
Message There is a message associated with this controller
Page 3