Baseline Systems BL-Commander - Manual (Page 14)

Installing the Universal Receiver
Connecting the Baseline Commander Universal Receiver
The Baseline Commander Universal Receiver works with any 24VAC solenoid valve sprinkler system.
The Baseline Universal Receiver connects to individual valves at the controller’s terminal strip or
directly to the valve wires at the controller, and bypasses the controller’s functions by directly
activating the valves. Once the connector is installed, simply plug the Receiver into the Black
Receptacle.
For locations where minimal operating range is needed, connect the 8”whip antenna directly to the
top of t he Receiver. For locations where more range is needed, use the magnetic base antenna and
included tuned antenna with threaded base. (Other antenna options are available). For maximum
performance, all antennas should be mounted far away from power transformers, electric motors,
VFD’s and overhead power lines. This type of equipment causes interference.
Warning!
Never connect directly to 110VAC. Damage to the receiver will occur, may be a
fire hazard and will void the warranty.