Chicago Electric MIG 200 93804 User Manual
Welder dual mig 200, Assembly and operating instructions
Advertising
WELDER DUAL
MIG 200
Model 93804
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at: http://www.harborfreight.com
Copyright
2006 by Harbor Freight Tools
®
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions, please call 1-800-444-3353.
®
©
TO PREVENT SERIOUS INJURY,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Advertising
Table of contents
Document Outline
- Contents
- PRODUCT SPECIFICATIONS
- GENERAL SAFETY RULES
- Specific Safety Rules
- Grounding
- Extension Cords
- Symbology
- UNPACKING
- ASSEMBLY INSTRUCTIONS
- To Attach The Wheels
- To Install The Wire Spool
- To Route The Wire
- To Change Wire Settings
- Setting The Gun Polarity For Wire Type
- To Attach The Ground Cable With Clamp
- To Install A Gas Cylinder
- OPERATING INSTRUCTIONS
- Before You Begin Welding
- Duty Cycle (Duration of Use)
- Setting Up The Weld
- Holding The Welding Torch
- Weld Settings Chart
- Volt-Ampere Curves
- Weld Diagnosis
- When the Weld is Completed
- INSPECTION, MAINTENANCE, AND CLEANING
- Nozzle Inspection, Cleaning, and Replacement
- Contact Tip Inspection, Cleaning, And Replacement
- Replacing The Welding Torch Liner
- PARTS LISTS & ASSEMBLY DIAGRAMS
- Electrical Schematic
- TROUBLESHOOTING
- WARRANTY