BlueAnt Bluesonic Bluetooth Portable Speakers - Manual (Page 13)

13
www.blueantwireless.com
5.1 Pairing to a mobile phone or PDA
This is an example. This procedure may differ depending
on the mobile phone you’re using.
a. Turn the Power switch to ON at the rear of the
BlueSonic.
b. Put your BlueSonic into Pairing mode - Press and
Hold the button until the indicator blinks rapidly and
you hear a distinct melody (about 6 seconds). At this
stage, the BlueSonic is in Pairing mode and is ready
to be found in searches by other Bluetooth devices.
c. Turn Bluetooth ON in your mobile phone or PDA.
(refer to your phones User Guide)
d. Perform a device discovery to Search/Add the
BlueSonic.
e. When devices are displayed, select the BlueSonic.
Enter Passkey “ 1234”.
f. Set the BlueSonic as a trusted/authorised device, if an
option in your phone.
g. Finish and exit. (Refer to your phones User Guide for
any additional steps)
h. To pair up more devices; Repeat steps b - g for each
device you want to pair.
Note: Some devices require you to pair once for High Quality
Audio/A2DP profile and again for Handsfree/Headset profile,
E.G HP 6515. Other phones require pairing only once but will
enable both profiles E.G Samsung D600, O2 XDA Atom)
CK811.indd 13 2006/3/10 ､U､ﾈ 12:48:43