BlueAnt Bluesonic Bluetooth Portable Speakers - Manual (Page 32)

32
BlueSonic
Bluetooth Portable Speakers
4. Why can’t I hear any sound from the Speaker?
The phone’s memory may have become corrupt and can be fixed by
rebooting the phone.
If this does not resolve the issue. Delete the pairing information and
re-pair
For a PC restart your audio program, or Delete the pairing information
and re-pair.
5. Why is the BlueSonic noisy and distorted?
Turn the BlueSonic Volume down to a level that does not give echo or
feedback. Also turn the volume down on your phone. A low battery can
also cause bad voice quality. Please charge the BlueSonic. Some people
like to have their phone ring loudly, but this may cause distortion when
transferred to the BlueSonic speaker. In your phone, set up a Profile
with lower ringing volumes and keypad tones and activate when using
with BlueSonic. (see your phones user manual for instructions on setting
up profiles). Also, you may have low antenna strength from your phone
network which may cause signal drop outs or disruption.
6. My BlueSonic worked great but now it won’t connect to my
phone, what can I do?
As newer phones are like mini-computers, they may become corrupt over
time and you may need to reset them every so often (at least once a
week is good). Simply switch off your phone remove the battery for a few
seconds, replace and reboot. The BlueSonic should now connect. If not,
remove existing pairing and re-pair the devices.
7. My computer won’t connect to the BlueSonic, what can I do?
Make sure you have not already got an active profile. You cannot connect
CK811.indd 32 2006/3/10 ､U､ﾈ 12:48:45