Camlink Film scanner User Manual

Page 4

Advertising
background image

4

©2012 NEDIS BV. Camlink is a registered trademark of NEDIS BV. Although every effort has been

made to ensure the accuracy of the information contained in this manual specifications are subject to

change and therefore NEDIS BV cannot guarantee its correctness and completeness at all times.

Adapter Yes
Positive board holder

Yes

Negative board holder

Yes

Brush Yes
USB cable

Yes

Safety precautions

To reduce risk of electric shock, this product should
ONLY be opened by an authorized technician when
service is required. Disconnect the product from mains
and other equipment if a problem should occur. Do not
expose the product to water or moisture.


Ventilation: The device should be situated so that its location or position does not interfere
with its proper ventilation.
Heat: The device should be situated away from sources of high heat such as radiators or
stoves.
Non use period: The USB cord for the device should be unplugged from the computer
when the unit is left unused for a long period of time.
USB overloading: Do not overload the USB connections on your computer. If you have too
many devices connected to your computer such as a wireless mouse, Media player,
Mobile phone or other USB powered devices there may not be enough power for the film
scanner to operate properly.
Servicing: The user should not attempt to service the device beyond those means
described in the operating instructions. All other servicing should be referred to a qualified
person.
Film Holder: The design of film holder is follow ISO standard.
In some cases the holes on the film will not match exactly to alignment of the holder. This
is caused by a non-standard camera. In this case, there will be a small black line on the
edge of the frame that can easily be cropped out using photo editing software.
*ISO-international Organization for Standardization

Installation instructions

Place the film scanner on the side and insert the end of the brush into the door on the
right side


Description of parts:

Positive slide Holder

Negative film Holder

Advertising