Iv. icon identification – COVIDIEN Filac™ 3000 AD/ADA Electronic Thermometer User Manual
Page 6
Filac
™
3000 AD/ADA Electronic Thermometer
3
IV. Icon Identification
AXILLARY
Temperature Mode
Works only with BLUE probe
and isolation chamber
Site Button
Use to change
measurement location
ORAL
Temperature Mode
Works only with BLUE probe
and isolation chamber
Quick Mode
Fast predictive measurement
mode – displays temperature
measurement in 3.5 seconds
°C/°F Button
Use to change
temperature scale
RECTAL
Temperature Mode
Works only with RED probe
and isolation chamber
Cold Mode
Post-operative mode.
Pre-heat temperature of
91°F (33°C)
Install/Remove Probe Cover
Flashing probe cover reminder
to install probe cover prior to
use and remove cover after use
Direct Mode
Non-predictive temperature
measurement mode
Pulse Timer
15 or 30 second timer
Pulse Timer Button
Use to start and stop
pulse timer
Non-ionizing
electromagnetic radiation
Keep dry
Humidity limitations
10%
95%
Manufacturer
Serial Number
Temperature limitations
-13°F
-25°C
131°F
55°C
Keep away from sunlight
Type BF Equipment
Degree of protection against
electrical shock – no
conductive connection
to the patient
Follow instructions for use -
This manual must be read prior
to use of the thermometer
(Symbol appears blue
on device)
CE mark
0123
Medical Electrical
Equipment
EN 50419
Dispose of as Electrical and
Electronic waste
Out of Range - High
Temperature measurement
is above 109°F (43°C)
Dead Battery
Unit will not operate until
new batteries are installed
By prescription only
Low Battery
Battery voltage is low – replace
batteries as soon as possible
Return to Base
Return unit to Anti-theft
base to clear anti-theft lock
out feature
Single use
Out of Range - Low
Temperature measurement
is below 86°F (30°C)
Progress Bar
Temperature measurement
status indication
Latex-free
DEHP-free
Non-Sterile
Authorized
representative in the
European Community
Manufacturer
Date of Manufacture