Surface maintenance for island range hood – CyClone SCB711 User Manual
Page 14
All rights reserved to North America Range Hoods Inc.
110 Silver Star Blvd., Unit 105, Scarborough, Ontario, Canada, M1V5A2
TEL: 416.293.0933 FAX: 416.293.4793
www.cyclonerangehoods.com
14
SURFACE MAINTENANCE FOR ISLAND RANGE HOOD
Always switch off power and unplug before cleaning and maintenance.
Clean with warm soapy water and clean cloth. Do not use corrosive or abrasive detergent or steel wool pads that can
scratch the surface of the machine.
Use non-abrasive stainless steel polish to buff out the luster and grain. Scrub lightly.
The stainless steel filters trap residue and grease from cooking. The filters should never have to be replaced but should
be cleaned thoroughly every thirty to sixty days depending on cooking habits. Filters may be placed in the dishwasher
on at low heat or soaked in warm, soapy water.
Grease filters
Replacing light bulbs
Make sure all power is turned off and bulbs are not hot.
Remove by using a slot-head screwdriver to pop out the bulb cover off, and unscrew and replace bulb.
To replace cover simply insert the three prongs into the slots and pop back into place.