Nikon F100 - Manual (Page 28)

55 54
Auto Exposure Lock
Exposure
• When you want to control the exposure of a specific area within a
scene, measure the exposure on the area with Spot or Center-Weighted
Metering, press the ‚ button to lock the exposure, then recompose
the picture. Set exposure to a mode other than Manual.
1
2 Position focus area on subject and lightly press the
shutter release button, then press the ‚ button.
Confirm focus indicator / appears in the viewfinder.
Rotate the metering system selector while pressing
the metering system selector lock release to select
Center-Weighted or Spot Metering.
• Matrix Metering is not recommended since the exposure cannot be
properly locked.
• When the ‚ button is pressed, exposure at the area of selected metering
system is locked and remains locked as long as the button is kept pressed.
• When the ‚ button is pressed, ´ appears in the viewfinder.
1. When the focus area and metering area are linked in Spot Metering
(page 45), exposure is locked at selected focus area.
2. When the focus area and metering area are not linked in Spot Metering
(page 45), exposure is locked at center focus area.
3 While keeping the ‚ button pressed, recompose,
focus and shoot.
• The following functions can be operated while the ‚ button is kept
pressed:
1. Flexible Program (page 47) in Programmed Auto Exposure mode
2. Shutter speed adjustment in Shutter-Priority Auto Exposure mode
3. Aperture adjustment in Aperture-Priority Auto Exposure mode
In any of these three situations, controlled shutter speed and/or aperture
will be displayed after change.
· 7 : Auto Exposure Lock can be set to be activated by lightly pressing
the shutter release button (page 72).
· 21 : Auto Exposure Lock can be set to remain after you remove your
finger from the ‚ button. In this case, AE lock is released when the ‚
button is pressed again (page 75).
3. When the Center-Weighted Metering is selected, exposure at 12mm-
diameter circle is locked.
• In Single Servo AF or Continuous Servo AF, focus is also locked
simultaneously (page 40). Make sure to confirm focus indicator / appears
in the viewfinder.
· 21 : Only exposure can be set to be locked when the ‚ button is
pressed (page 75).
P500 (E) 02.12.27 5:48 PM Page 54
WWW.LENSINC.NET