Check control – BMW X5 User Manual

Page 80

Advertising

Check Control

TRANS. FAILSAFE PROG

Please consult the nearest BMW
Sports Activity Vehicle center, refer
to page

CHECK BRAKE LININGS
Have the brake pads inspected by
your BMW Sports Activity Vehicle
center, refer to page

133

CHECK COOLANT LEVEL
Coolant too low, top off at the next
opportunity, refer to page

145

ENGINE FAILSAFE PROG
Fault in the engine electronics.
You can continue to drive with
reduced engine output or engine
speed.
Please have the system inspected by
your BMW Sports Activity Vehicle
center.

Displays after completion of trip

All of the malfunctions registered during
the trip appear consecutively when the
ignition key is turned to position 0.

The following displays will appear when
appropriate:

LIGHTS ON

KEY IN IGNITION LOCK

CHECK ENGINE OIL LEV
Top up engine oil at the next oppor-
tunity, e.g. while refueling, refer to
page

143

This display appears when you open
the driver's door after parking the vehi-
cle. A supplementary acoustic signal is
also heard.

Status messages remain available with
the CHECK button 3 for a period of
approx. three minutes after the display
goes out and the key is removed from
the ignition lock. If there were multiple
messages, press the CHECK button
repeatedly to view them all in
sequence.

Checking the Check Control

Press the CHECK button 3 with the
ignition key in position 2:
CHECK CONTROL OK appears in the
display.

No malfunctions are present in the
monitored systems.

Computer

You can find a description of the com-
puter on pages

and

as well as in

the Owner's Manual for the Onboard
Computer.

You can have the Check Control
and computer messages dis-

played in a different language.