Control function, Oil warning light (red), Engine switch – Yamaha ef2000is User Manual

Page 13: Dc protector

Advertising
background image

– 8 –

1

2

7DK-018

700-115

AE00111

Oil warning light (Red)

When the oil level falls below the lower level, the oil
warning light comes on and then the engine stops auto-
matically. Unless you refill with oil, the engine will not
start again.

TIP

If the engine stalls or does not start, turn the engine
switch to “ON” and then pull the recoil starter. If the oil
warning light flickers for a few seconds, the engine oil is
insufficient. Add oil and restart.

AE00101

CONTROL FUNCTION

AE00121

Engine switch

The engine switch controls the ignition system.

1

7 “ON”

Ignition circuit is switched on.
The engine can be started.

2

5 “STOP”

Ignition circuit is switched off.
The engine will not run.

DC protector

The DC protector turns off 2 automatically when elec-
tric device being connected to the generator is operat-
ing and current above the rated flows. To use this equip-
ment again, turn on the DC protector by pressing its
button to “ON” 1.

1

2

7DK-052

1 “ON”

Direct current is output. (This is the default position.)

2 “OFF”

Direct current is not output.

7DK-9-11_a 11.3.21 15:19 Page 8

Advertising