Dell OptiPlex 760 - Manual (Page 147)

Ultra Small Form Factor System Board Screws
Replacing the System Board
1. Gently align the board into the chassis and slide it toward the back of the computer.
2. Replace the screws on the system board.
3. Replace any components and cables that you removed from the system board.
4. Reconnect all cables to their connectors at the back of the computer.
5. Replace the computer cover (see Replacing the Computer Cover ).
1 screws (9)
1 screws (10)
NOTE: The system board is shipped in manufacturing mode. The user or service provider must select the manageability option upon first boot. See
Manageability on how to select the manageability mode.