HP LaserJet 1300 - Manual (Page 154)

146 G Working with the print server ENWW
Troubleshooting the print server
Installed print server stops working
If you have successfully installed a network printer and you are no longer able to print to it, the
problem might be related to Dynamic Host Configuration Protocol (DHCP).
In a DHCP environment, a DHCP server allocates IP addresses as computers and printers on the
network need them. DHCP-supplied addresses are dynamic and might cause problems for
computers and printers, which expect IP addresses to be static.
If your print server acquired its IP address via DHCP, the IP address might have changed after you
set up the printer. In this case, the printer is no longer available to the network. HP recommends
configuring the print server with a static IP address.
To assign a static IP address
Note Consult your network administrator before changing the print server’s IP address. Be sure to notify
other users of any changes.
1 Open a Web browser and type the print server’s current IP address as the URL.
2 Click the Networking tab.
3 In the TCP/IP section, change the configuration method to Manual.
4 Type a new IP address in the IP address box.
Note You will lose your connection to the embedded Web server when you change the IP address. To
re-establish the connection, type the new IP address in the browser’s URL field.