Cop y – Canon PowerShot G12 User Manual
Page 128
Viewing Images in Filtered Playback
128
Jump by and Images
●
In single image playback, press the
d
button, then press the
op buttons to
choose a jump method.
●
If you press the
qr buttons, the display
will advance to the image that is the
chosen number of images away.
●
Pressing the
n button restores single
image playback.
Using the Front Dial to Jump
Turn the front dial to jump images by
,
,
, and
.
●
In single image playback, turn the
÷ dial,
then press the
op buttons to choose a
jump method.
●
If you turn the
÷ dial, the display will
advance to the image by the chosen jump
method.
What if you can’t choose a filter?
Filters that do not have any corresponding images cannot be chosen.
Filtered playback
In filtered playback (Step 2), you can view filtered images with “Quickly Searching
Images” (p. 126), “Viewing Slideshows” (p. 129), and “Magnifying Images”
(p. 131). You can process all filtered images at once while performing operations
in “Protecting Images” (p. 136), “Erasing All Images” (p. 140), or “Choosing
Images for Printing (DPOF)” (p. 155), by choosing all of the filtered images.
However, if you change the category (p. 143), or edit an image and save it as a
new image (p. 146), a message will appear, and filtered playback will cancel.
Turning the
÷
dial in index playback will advance the images according
to the jump method chosen during single image playback. However, if you
chose
or
, the jump method will switch to
.
COP
Y