Canon PowerShot G12 - Manual (Page 183)

Using an Externally Mounted Flash (Sold Separately)
183
Attach the back component of the
conversion lens adapter.
● Align the z mark on the back component
of the conversion lens adapter with the z
mark on the camera and turn the adapter
in the direction of the arrows until locked.
● To remove the adapter, hold down the ring
release button while turning the adapter in
the opposite direction.
Attach the Off Camera Shoe Cord
to the bracket.
● Slide the bracket screw to the outer end of
the bracket, and secure the screw into the
tripod socket on the Off Camera Shoe
Cord.
Attach the bracket.
● Slide the bracket screw to the outer end of
the bracket, and secure the screw to the
tripod socket on the bottom of the camera.
Attach the Off Camera Shoe Cord.
● Attach the camera connection component
of the Off Camera Shoe Cord to the hot
shoe on top of the camera.
COP
Y