Canon PowerShot G10 - Manual (Page 239)

237
T
rou
blesh
oo
ting
Memory card is not
formatted correctly. z Format the memory card (pp. 16 ,
220) .
z If reformatting does not work, the
memory card logic circuits may be
damaged. Consult the nearest Canon
Customer Support Help Desk.
SD memory card or SDHC
memory card is write
protected. z Slide the write protect tab upward
(p. 256) .
Image Seen in Viewfinder vs. Recorded Image.
Usually the recorded
image contains more of
the scene than is seen in
the viewfinder. z Confirm the actual image size with the
LCD monitor. Use the LCD monitor
when taking close-up shots
(p. 74) .
Image is blurred or out of focus.
The camera moves when
the shutter button is
pressed. z Confirm the procedures in
“
appears” (p. 235) .
AF-assist Beam is set to
[Off]. z In dark places where it is difficult for
the camera to focus, the AF-assist
Beam will emit to assist focusing. As
the AF-assist Beam will not function
when turned off, set it [On] to activate
it
(p. 56) . Take care not to obstruct the
AF-assist Beam with your hand when
used.
Subject is out of focal
range. z Shoot with the subject at the correct
focusing distance
(p. 276) .
z The camera may be set to an
unintended function (such as macro or
manual focus). Cancel the setting.
The subject is hard to
focus on. z Use the focus lock, AF lock or manual
focus to shoot
(p. 128) .