Select [lcd/viewfinder, Make settings – Canon PowerShot G10 User Manual
Page 69
67
Ba
sic Op
eratio
ns
2
Select [LCD/Viewfinder].
1. Use the
,
,
or
button to
select ,
or .
• Sets LCD monitor display mode after
the DISP. button is pressed.
• If you do not wish to change the
display mode, press the DISP. button
to display
(
/
/
).
• You cannot add
to the current
active LCD/Viewfinder icon.
3
Make settings.
1. Use the
,
,
or
button to
select the items you wish to display
on the LCD monitor.
2. Press the
button to place a 3
mark.
3. Press the MENU button.
• Even though items that are grayed out can be set, they will not
display in certain shooting modes.
• Display locations with no 3 marks will not have any information
displayed.
If you press the shutter button halfway and return to the
shooting screen from the custom display settings screen, the
settings will not be saved.
Display 1
Display Off
Display 2
Current active display
Items with 3 are displayed.