Canon PowerShot SX30 IS - Manual (Page 123)

123
You can automatically play back images recorded to a memory card.
Choose [Slideshow].
● Press the n button to choose
[Slideshow] from the 1 tab, then press the
m button.
Make the setting.
● Press the op buttons or turn the  dial
to choose an item, then press the qr
buttons to adjust the setting.
Choose [Start].
● Press the op buttons or turn the  dial
to choose [Start], then press the m button.
X The slideshow will start a few seconds
after [Loading image...] displays.
● You can pause/restart a slideshow by
pressing the
m button again.
● Press the n button to stop the
slideshow.
Viewing Slideshows
Repeat Repeats playback of images
Play Time Display time for each image
Effect
Transition effects when switching
between images
• If you press the qr buttons or turn the  dial during playback, the
image will switch. If you keep the qr buttons pressed, you can fast-
forward through images.
• The power saving function (p. 52) does not work during slideshows.
• You cannot change [Play Time] if [Bubble] is chosen in [Effect].
• You can also start a slideshow in single image playback by pressing and
holding the
m button and immediately pressing the button.
COP
Y