Canon PowerShot SX30 IS - Manual (Page 130)

Protecting Images
130
Protect the image.
● If you press the n button, a
confirmation screen will appear.
● Press the qr buttons or turn the  dial to
choose [OK], then press the m button.
Select Range
Choose [Select Range].
● Follow Step 2 on p. 129 to choose [Select
Range], then press the
m button.
Choose a starting image.
● Press the m button.
● Press the qr buttons or turn the  dial to
choose an image, then press the m
button.
Choose an ending image.
● Press the r button to choose [Last image],
then press the m button.
If you switch shooting modes or turn off the power before performing the
operations in Step 3, images will not be protected.
COP
Y